Meinberg PZF511 - Manual (Page 11)

11
Menu FIELD
The digitized value of the field strength is displayed in this menu. There is a logarithmic
relation between this value and the field strength. This menu is useful for mounting the
antenna, like described in chapter 'Assembly of antenna'.
Menu SETUP
The user-specific parameters of the PZF511 are set in this menu. To avoid the erroneous
change of these parameters, it is not possible to enter the submenus by a simple pressing
of the Set-button. The first submenu is entered if the Set-button is pressed until the
character '*' is displayed behind the text SETUP and the Menu-key is actuated then.
The following submenus are selectable (Set-button and Menu-key used as usual now):
Menu DIST. o. T
The distance to the transmitter is entered in this menu for compensating the propagation
delay of the received pseudo-random code. This setting should be done as exact as
possible because the absolute precision of the time frame is influenced by this value.
After pressing the Set-button a four digit kilometer-value is displayed. By pressing the
Set-key again, the first position is selected (flashing digit). To choose a different digit, the
Menu-key has to be pressed, to increment the current digit the Set-button must be used. If
the value is entered, it will be stored by pressing the Menu-key until the display returns to
the setup submenu. The km-value is stored in the internal EEPROM of the board.