Daewoo SD-2100P - Manual (Page 71)

70
Before doubting about troubles (DVD)
• The recorder does not play.
• No sound comes through.
• A disc is playing but screen does
not appear or poor screen appears.
• Sound is irregular
• remote control does not work.
• Dolby Digital 5.1 CH sound does
not work
• “AUDIO” or “SUBTITLE” button
does not work.
Checks Symptom
➤ If a DVD is from overseas, it may not be played. Please check a
DVD’s region code whether it has the relative region code 2 or All.
➤ Please check whether a DVD is inserted in a right direction.
➤ If it is a CD-ROM for PC or DVD-ROM, it does not work.
➤ Play mode may be “SLOW” or “PAUSE”(In abnormal speed
play, no sound comes through)
➤ Did you connect the parts in right way?
➤ Please check the operative condition of TV or amplifier.
➤ From “DEFAULT” SET, please check “AUDIO” items.
➤ Did you turn on your TV set?
➤ Did you connect the parts in right way?
➤ The play may be in “PAUSE”.
➤ A disc may have some contaminants or be damaged.
➤ A disc may be bad one.
➤ Please check the connection with Dolby Digital amplifier.
➤ Please check the plugs are connected with one another tightly.
➤ Some contaminants may be remained in connection terminal.
➤ Please check the degree of the remote control, distance or any
interruption.
➤ Battery may be weak or exhausted.
➤ When you operate DVD, use it by pressing [DVD] button.
➤ Dolby Digital 5.1 CH sound can be worked in the Dolby
Digital amplifier only.
➤ Please check “Dolby Digital 5.1 CH” mark on your DVD.
➤ In case of playing it through digital output, while pressing
“STOP”, please check whether “DIGITAL OUTPUT” is
“BITSTREAM” by pressing “SETUP”.
➤ Please check the connection is correct.
➤ If a DVD does not include language information, it does not
support the function.
DV6T711P-AP(DESUK)2 02.7.22 3:45 PM ˘ ` 70 mac001 300DPI 120LPI