Daewoo SD-2100P - Manual (Page 17)

16
Setting up your player
(Option 1) - Connecting your player through RF lead
With this connection, if your player is receiving CH ARD and your TV is displaying CH3, when you press the
[TV/VCR] button on the remote control, your TV will automatically display the CH ARD. “VCR” will be displayed.
In this mode, to change the viewing channels the [PR-] and [PR+] buttons on the player remote need to be used. To
switch off this mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You will get
better pictures and sound quality if you connect your player with a scart lead.
■ Before you start, unplug all the equipment from the mains supply.
Television
Aerial
The type of aerial you should
use, depends on local
interference and how far you
are from the transmitter. You
should contact a local retailer if
you have any questions about
your aerial.
Back view of your player
100-240V~,
50/60 Hz
(Option 2) - Connecting your player through a scart lead
Television
Aerial
Back view of your player
100-240V~,
50/60 Hz
Scart lead (If supplied)
DV6T711P-AP(DESUK)1 02.7.24 11:16 AM ˘ ` 16 mac001 300DPI 120LPI