Daewoo SD-2100P - Manual (Page 62)

Setup
61
Move: Select : Exit:Setup/Return
Move: Select : Exit:Setup/Return
AUDIO Setup
■ Before setting it, you should change status into DVD by pressing [DVD] button on the
remote control.
Select a digital output.
Set output conditions to coaxial or optical
terminal. You can set following three(3) values of
digital output;
• Bitstream: The same signal as audio signal
recorded in disc goes to digital audio output
terminal.
• PCM: Decoded audio signal goes to digital
output terminal.
• Off: Not any output goes to digital audio
output terminal.
2
Select Dual Mono.
Dual Mono means 2 individual mono channels.
Dual Mono is mainly used to apply 2
different languages to one program. This
function is similar to multichannel sound
function supported in TV or VCR. 2 mono
channels can be combined into total 4 values;
Stereo, L- Mono, R- Mono and Mixed Mono.
3
A user may select audio menu according to a user’s speaker set.
While DISC STOP or Resume STOP, press [SETUP/ENTER] button.
1
• Stereo: outputs left channel and right channel to left speaker and right
speaker respectively.
• L- Mono: outputs left channel to left speaker and right speaker.
• R-Mono: outputs right channel to left speaker and right speaker.
• Mixed Mono: mixes 2 mono channels and outputs the mixed channel to left
and right speaker at the same time.
Language Video Audio Others
Digital Out Bitstream
Dual Mono Stereo
Dynamic Range Off
Bitstream
PCM
Off
Language Video Audio Others
Digital Out Bitstream
Dual Mono Stereo
Dynamic Range Off
Stereo
L-Mono
R-Mono
Mixed Mono
DV6T711P-AP(DESUK)2 02.7.22 3:45 PM ˘ ` 61 mac001 300DPI 120LPI