Daewoo SD-2100P - Manual (Page 70)

The
others
69
Noise
• Noise means poor screen conditions of player such as interruption or
trembles in the top of bottom of a screen.
• If the picture is noisy, please adjust the “TRACKING” control buttons .
• Adjustment may not improve picture quality if the tape is originally
recorded mixed with some noise or kept in poor conditions.
• If some noise remains after adjusting it, VCR heads may be
contaminated or worn.
• In case VCR heads are contaminated, please insert a headCleaning
tape (refer to its instructions!).
Auto-detect the contamination of VCR heads
• If the product, which has a auto-detector, detects a contaminated head(s), it shows the conditions to notice the
contamination on screen.
* In case of the notice on screen, please rub the heads with a head-cleaner followed by “How to use a head-
cleaner”.
How to use a head cleaner
• In case of a old or contaminated videotape, screen may not be clean from the contamination of player heads.
Please remove contaminants using a head-cleaner like below order.
1 Insert a head-cleaner into player
2 Press “PLAY” for 5 seconds, and then press “FF” for about 10 seconds.
3 Eject a head-cleaner from player
• If the screen is not clean yet, please repeat the above 2 or 3 times more.
• A head-cleaner is not for sale. Please ask it for the nearest agent.
• In case a user ask the removal of contaminants of us, the user should pay extra charges.
PLAY (5secs) FF (10secs)
DV6T711P-AP(DESUK)2 02.7.22 3:45 PM ˘ ` 69 mac001 300DPI 120LPI