Digital Research Technologies DRSCAN36EPPR - Manual (Page 5)

5
CHAPTER 1
Installing the Scanner
This chapter gives you step-by-step instructions on setting up your
scanner and installing the included image processing software suite,
ScanOffix Pro. Before going on with the installation, be sure to
familiarize yourself with the safety precautions in Appendix A of this
guide. To install your scanner and software, you will need to:
•
Connect the scanner to your computer
•
Install the TWAIN driver and the application software
(ScanOffix Pro), ScanOffix Pro is found on the CD-
ROM, and the TWAIN driver is included on the floppy
disk that came with your scanner.
What You Need
To use the scanner and the included software, you must have the
following:
•
IBM PC 486 compatible or higher.
•
Windows 95, 98 or Windows NT.