Measurement Computing Digital HS - Manual (Page 8)

Getting Started
2.1 Inspection
The Digital488HS/32 was carefully inspected, both mechanically and electrically,
prior to shipment. After receiving the Digital488HS/32, carefully unpack all items
from the shipping carton and check for any obvious signs of physical damage. Report
any such damage found to the shipping agent immediately. Retain all shipping
materials in the event that shipment back to the factory is necessary.
Every Digital488HS/32 is shipped with the following items:
• Digital488HS/32 High Speed Digital I/O Interface
• DigitalHS-901 Instruction Manual
• 167-0800 Accessory Kit, which includes:
CA-1 Power Cable
FU-1-.25 1/4 Amp Replacement Fuse
FE-1 Rubber Feet (4)
EN-6 Rack Ears (2)
HA-41-6 Rack Ear Screws (4)
CN-19-37 37 Pin Male Connectors (2)
CN-17-37 Hood for CN-19-37 (2)
2.2 Configuration
The Digital488HS/32 has one external eight position switch, accessible from the rear
panel, and four internal eight position configuration switches (S2, S3, S4 and S5).