Measurement Computing Digital HS - Manual (Page 6)

IEEE 488.1 Specification Subsets:
SH1, AH1, T6, TE0, L3, LE0, SR1, PP2, RL0, DC1, DT1, C0, E2
DIO Drivers: Tri-State drivers are used on all DIO lines except during PPAS
(Parallel Poll Active State) when open collector drivers are used.
Connector: Standard IEEE 488.1 connector with metric studs.
Data Transfer Speed: 1,000,000 bytes/sec (handshake lines connected externally
together)
SRQ: Switch selectable SRQs on Input Port Full, Output Port Empty, External
Service Bit #1 and External Service Bit #2.
Parallel Poll: Switch selectable response on Input Port Full and Output Port Empty.
General
Indicators: LEDs for Talk, Listen, SRQ, Input Port Full, Output Port Empty and Power.
Power: 105-125V or 210-250v, 50/60 Hz; 60 VA max
Environment: 0 to 50°C; 0 to 70% RH to 35°C. Linearly derate RH 3%/°C from 35° to 50°C
Dimensions:
425mm wide x 45 mm high x 203 mm deep (16.75" x 1.75" x 8")
Weight: 4.5 kg (10 lbs)
Controls: Power switch, external switch for IEEE 488 bus address, internal switches for
output data power on levels, SRQ and ist enable, output data logic sense, input
data
logic sense and logic sense for Trigger, Clear, handshake and END lines.
Supplied Accessories: Two (2) mating solder-tab I/O connectors, power cord, manual and
rack mount kit.
* *Specifications Subject to Change Without Notice