Measurement Computing ADAC/5500 Series Installation - Manual (Page 15)

ADAC-TB-16 Screw-Terminal Board
One ADAC-TB-16 provides screw-terminal access to all analog and digital I/O signals from any one of the
following boards: ADAC/5501MF, ADAC/5501MF-V, ADAC/5503HR, and ADAC/5503HR-V. The
terminal board connects to the board via a 3-foot long 68-pin conductor expansion cable, p/n CA-G55-
ADAC. The terminal board accepts wire up to 14 AWG.
ADAC-TB-16
WARNING
Always turn the computer power OFF and unplug it before connecting or disconnecting a screw
terminal panel or a cable to the PCI card. Failure to do so could result in electric shock, or
equipment damage.
1107-0940, rev 2.0 908096 ADAC/5500 Series Installation Guide 15