Measurement Computing Micro488/p - Manual (Page 31)

Command Descriptions 09-27-02 3-13
TB IEEE BUS TERMINATOR
The IEEE BUS TERMINATOR command is used to select the IEEE bus terminator for
reads from the IEEE bus. The selected terminator signifies the end of an ENTER sequence.
The available terminators are:
1 - LF
2 - CR
3 - LF-CR
4 - CR-LF
SYNTAX TB;n
n is one of the available terminator types.
RESPONSE None
BUS STATES None
EXAMPLE PRINT #1, "TB;1" Select LF as an IEEE bus
terminator.