Measurement Computing Micro488/p - Manual (Page 24)

3-6 09-27-02 Command Descriptions
/A
The /A command is a low level IEEE command which asserts the attention line. After
completion of this command, the Micro488/p is left in the controller active state.
SYNTAX /A
RESPONSE None
BUS STATES ATN
EXAMPLE PRINT#1,"/A"
/L
The /L command is a low level IEEE command which sends the LAG command to the
specified device. After completion of this command, the Micro488/p is left in the controller
active state.
SYNTAX /L
RESPONSE None
BUS STATES ATN,LAG
EXAMPLE PRINT#1,"/L;10" Send LAG10 on the IEEE bus.