Installing the usb-dio96h/50, What comes with your shipment, Hardware – Measurement Computing USB-DIO96H-50 User Manual
Page 7: Software, Documentation, Optional components, Unpacking, Installing the software, Installing the hardware, Connecting the external power supply

7
Chapter 2
Installing the USB-DIO96H/50
What comes with your shipment?
The following items are shipped with the USB-DIO96H/50.
Hardware
USB-DIO96H/50
External power supply and cord (PS-5V3AEPS) – 5 volt, 3 amp DC power supply
USB cable
Two DIN rail mounting feet
Software
MCC DAQ CD
Documentation
In addition to this hardware user's guide, you should also receive the Quick Start Guide. This booklet provides
an overview of the MCC DAQ software you received with the device, and includes information about installing
the software. Please read this booklet completely before installing any software or hardware.
Optional components
C50FF-x cable
Unpacking
As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the device from its packaging, ground yourself using a wrist strap or by simply
touching the computer chassis or other grounded object to eliminate any stored static charge.
If any components are missing or damaged, contact us immediately using one of the following methods:
Knowledgeb
Phone: 508-946-5100 and follow the instructions for reaching Tech Support
Fax: 508-946-9500 to the attention of Tech Support
Email:
For international customers, contact your local distributor. Refer to the International Distributors section on our
website
Installing the software
Refer to the Quick Start Guide for instructions on installing the software on the MCC DAQ CD. This booklet is
available in PDF a
Installing the hardware
Before you connect the USB-DIO96H/50 to your computer, connect the external power supply that is shipped
with the device.
Connecting the external power supply
Power to the USB-DIO96H/50 is provided with the +5 V external power supply (PS-5V3AEPS). You must
connect the external power supply before connecting the USB cable to the USB-DIO96H/50 and your
computer.