Measurement Computing USB-DIO96H-50 - Manual (Page 10)

USB-DIO96H/50 User's Guide Installing the USB-DIO96H/50
10
Figure 3. C50FF-x cable
Field wiring and signal termination
 CIO-MINI50 – 50-pin screw terminal board.
 CIO-TERM100 – 100-pin screw terminal board (two 50-pin IDC connectors).
 CIO-SPADE50 — 16" × 4" termination panel which mates with both 37-pin and 50-pin connectors.
 SCB-50 – 50-conductor, shielded signal connection box.
Details on these products are available on our web site at www.mccdaq.com/products/screw_terminal_bnc.aspx .
 CIO-ERB24 – 24 Form C relays, 6 amp relay accessory board for digital signal conditioning.
 CIO-SERB24/FD – 24 Form C relays, 10 amp, fault detecting relay accessory board with socketed and
field-replaceable relays.
 CIO-ERB48 – 48 Form C relays, 6 amp, relay, 50-pin accessory board for digital signal conditioning.
 CIO-SERB48 – 24 Form C relays, 10 amp relay accessory board with socketed and field-replaceable
relays.
 SSR-RACK24 – 24-channel solid-state relay mounting rack for digital signal conditioning.
 SSR-RACK48 – 48-channel solid-state relay mounting rack with quad-format devices.
Details on these products are available on our web site at www.mccdaq.com/products/signal_conditioning.aspx .
For additional information about digital interfacing
Detailed information regarding digital interfacing is contained in Guide to DAQ Signal Connections. This
document is available on our web site at
www.measurementcomputing.com/signals/signals.pdf .