Internal components, Usb out connector, Usb in connector – Measurement Computing USB-1616FS User Manual
Page 13: External power connectors
USB-1616FS User's Guide
Functional Details
13
Internal components
Major components on the USB-1616FS are shown in Figure 3.
Two (2) USB connectors
Two (2) external power connectors
USB LED
PWR LED
Four (4) Screw terminal banks
Figure 3. USB-1616FS internal components
USB OUT connector
The
USB OUT
connector is a downstream hub output port intended for use with other MCC USB Series
products only. The USB hub is self-powered, and can provide 100 mA maximum current at 5 V. The USB out
connector is labeled USB OUT on the enclosure and on the board.
For information on daisy chaining to other MCC USB Series products, refer to
USB IN connector
Connect the
USB IN
connector to the USB port on your computer (or USB hub connected to your computer).
The USB in connector is labeled
USB IN
on the enclosure and on the board.
External power connectors
The USB-1616FS has two external power connectors labeled
POWER IN
and
POWER OUT
on the enclosure.
The
POWER IN
connector is labeled
IN
on the board, and the
POWER OUT
connector is labeled
OUT
on the
board.