Measurement Computing PCI-DDA02/12 - Manual (Page 9)

PCI-DDA02/12 User's Guide Installing the PCI-DDA02/12
9
Figure 2. C100FF-x cable
Details on the C100FF-x cable are available on our web site at www.mccdaq.com/products/accessories.aspx .
Information on signal connections
General information regarding signal connection and configuration is available in the Guide to Signal
Connections. This document is available on our web site at
www.mccdaq.com/signals/signals.pdf .
Signal termination
You can use the following screw terminal boards with the C100FF-x cable:
 SCB-50: 50 conductor, shielded signal connection/screw terminal box; provides two independent 50-pin
connections, with each connected one-to-one to a 50-pin header for ribbon cable mating.
 CIO-TERM100: 100-pin screw terminal board with daisy-chained 50-pin IDC connectors.
 CIO-MINI50: 50-pin screw terminal board.
Details on these products are available on our web site at www.mccdaq.com/products/screw_terminal_bnc.aspx .