Introducing the pci-das08, Overview: pci-das08 features, Software features – Measurement Computing PCI-DAS08 User Manual
Page 7: Introducing the pci-das08 -1, Overview: pci-das08 features -1, Software features -1
Chapter 1
Introducing the PCI-DAS08
Overview: PCI-DAS08 features
This manual explains how to configure, install, and use your PCI-DAS08 board. The PCI-DAS08 is a
multifunction measurement and control board designed to operate in computers with PCI bus accessory slots.
The PCI-DAS08 board provides the following features:
!
Eight single-ended 12-bit analog inputs
!
12-bit A/D resolution
!
Sample rates of up to 40 kHz
!
±5V input range
!
Three 16-bit counters
!
Seven digital I/O bits (three input, four output)
!
Connector compatible with Measurement Computing’s ISA-based CIO-DAS08 board
The PCI-DAS08 board is completely plug-and-play, with no jumpers or switches to set. All board addresses are
set by the board's plug-and-play software.
Software features
For information on the features of InstaCal and the other software included with your PCI-DAS08, refer to the
Quick Start Guide that shipped with your device. The Quick Start Guide is also available in PDF at
.
he latest software version or versions of the software supported
under less commonly used operating systems.
1-1