Measurement Computing PCI-DAS08 - Manual (Page 11)

PCI-DAS08 User's Guide Installing the PCI-DAS08
Configuring the PCI-DAS08
All hardware configuration options on the PCI-DAS08 are software controlled. There are no switches or
jumpers to set.
Connecting the board for I/O operations
Connectors, cables – main I/O connector
Table 2-1
Table 2-1. Board Connectors, cables, accessory equipment
lists the board connectors, applicable cables and compatible accessory boards.
Connector type 37-pin male "D" connector
Compatible cables ! C37FF-x 37-pin cable. x = length in feet (Figure 2-2).
! C37FFS-x 37-pin shielded cable. x = length in feet ( ).
Compatible accessory products
(with the C37FF-x cable) CIO-MINI37
SCB-37
ISO-RACK08
Compatible accessory products
(with the C37FFS-x cable) CIO-MINI37
SCB-37
ISO-RACK08
CIO-EXP16
CIO-EXP32
CIO-EXP-GP
CIO-EXP-BRIDGE16
CIO-EXP-RTD16
Figure 2-3
CH0
CH1
CH2
CH3
CH4
CH5
CH6
CH7
+5V
DGND
DIN3
DIN2
EXT INT
CTR3 GATE
CTR2 GATE
CTR1 GATE
-12V
LLGND
LLGND
LLGND
LLGND
LLGND
LLGND
LLGND
DGND
DOUT3
DOUT2
DOUT1
CTR3 OUT
CTR2 OOUT
CTR2 CLK
CTR1 OUT
CTR1 CLK
DIN1
Figure 2-1. Main connector pinout
2-3