Measurement Computing PCI-DAC6702 - Manual (Page 16)

PCI-DAC6702 and PCI-DAC6703 User's Guide Installing the PCI-DAC6702 and PCI-DAC6703
16
Field wiring and signal termination accessories
You can use the following BNC and screw terminal boards to terminate field signals and route them into the
PCI-DAC6702 and PCI-DAC6703 boards using the C100HD50-x cable:
 BNC-16SE – Brings analog signals to standard BNC connectors. Designed for boards operating in single-
ended mode.
 BNC-16DI – Brings analog signals to standard BNC connectors. Designed for boards operating in
differential mode.
 CIO-MINI50 – 50-pin screw terminal board. Two boards are required.
 CIO-TERM100 – 100-pin screw terminal board (daisy-chained 50-pin IDC connectors).
 SCB-50 – 50 conductor, shielded signal connection/screw terminal box provides two independent 50-pin
connections.
You can use the following screw terminal box and BNC connector box to terminate field signals and route them
into the PCI-DAC6702 and PCI-DAC6703 board using the C100MMS-x cable:
 SCB-100 – 100 conductor, shielded signal connection/screw terminal box provides two independent 50-pin
connections.
 BNC-16DI-FE – Brings analog signals to standard BNC connectors. Designed to be compatible with the
100-pin shielded C100MMS-x cable.
Details on these products are available on our web site at www.mccdaq.com/products/screw_terminal_bnc.aspx .