Measurement Computing CIO-DUAL-AC5 - Manual (Page 12)

CIO-DUAL-AC5 User's Guide Installing the CIO-DUAL-AC5
12
Field wiring, signal termination, and conditioning
The CIO-DUAL-AC5 is typically used for driving the SSR-PB24 solid state relay rack. Use the C50FE-x cable
for connections.
 SSR-PB24 – 24 channel solid-state relay mounting and interface rack.
Details on this product are available on our web site at www.mccdaq.com/products/signal_conditioning.aspx .
You can use the following cabling, screw termination, and signal conditioning products with the C50FF-x
cable.
 CIO-TERM100 – 100-pin screw terminal board (Two 50-pin IDC connectors).
 CIO-SPADE50 — 16" X 4" termination panel which mates with both 37-pin and 50-pin connectors.
 CIO-MINI50 – 50-pin screw terminal board.
 SCB-50 – 50 conductor, shielded signal connection/screw terminal box provides two independent 50-pin
connections.
 SCB-100 – 100 conductor, shielded signal connection/screw terminal box provides two independent 50-pin
connections.
Details on these products are available on our web site at
www.mccdaq.com/products/screw_terminal_bnc.aspx .
Information on signal connections
General information regarding signal connection and configuration is available in the Guide to Signal
Connections (available at
www.mccdaq.com/signals/signals.pdf) .