Definitions and abbreviations – MEGA Corp. MHT175-CAT777-OPS-1 User Manual
Page 5

MHT175-CAT777(G)-1
1 Aug 2012
SECTION 1
Definitions and Abbreviations
Contents
1-1
Description ………………………….….… 1-1
Warnings, Cautions & Notes ……………... 1-1
Shall, Will & May ……………................... 1-1
MHT175-CAT777(G) Overview ………… 1-2
Abbreviations ….……………………..… .. 1-3
DESCRIPTION
This technical manual contains information
required to safely operate the MHT175-
CAT777(G). See the CAT 777G Operations
and Safety manual for additional information
specific to the CAT 777G chassis.
WARNINGS, CAUTIONS AND
NOTES
The
following
definitions
are
found
throughout the manual and apply as follows:
Operating procedures and techniques, which
could result in personal injury and/or loss of
life if not carefully followed.
Operating procedures and techniques, which
could result in damage to equipment if not
carefully followed.
Operating procedures and techniques that are
considered essential to emphasis.
USE OF SHALL, WILL AND MAY
Shall and Will – Used when application of a
procedure is mandatory.
Should – Used when application of a
procedure is recommended.
May - Used to indicate an acceptable or
suggested means of accomplishment.