MEGA Corp. MHT175-CAT777-OPS-1 - Manual (Page 29)

MHT175-CAT777(G)-1
1 Aug 2012
SECTION 6
Appendix
6-3
MHT175-CAT777(G)CL-1
1 Aug 2012
BEFORE OPERATIONS
These procedures are used to perform a walk-around
inspection of the MHT175-CAT777(G) system before
use or beginning of the shift. This inspection is in
addition to and does not replace the CAT 777(G)
inspection requirements. These procedures are used to
perform a walk-around inspection of the MHT system
before use or beginning of the shift. This inspection is
in addition to and does not replace the CAT 777(G)
inspection requirements.
1. Vehicle Engine – AS REQUIRED
2. Chocks – INSTALLED
3. Transmission Control Lever – P (Park)
4. Hoist Control Lever – HOLD
5. Hitch Ball Retaining Plate – CHECKED FOR
DAMAGE AND SECURITY (Lift ball skirt and
check for loose or sheared bolt heads.)
6. Turn Limit Indicator – CHECKED FOR
SECURITY AND DAMAGE
N-2