beautypg.com

Normal operations – MEGA Corp. MHT175-CAT777-OPS-1 User Manual

Page 23

background image

MHT175-CAT777(G)-1

1 Aug 2012

SECTION 4

Normal Operations

4-5

16. RH Door Hydraulic Cylinders, Structure

Cavity Drain Holes and Lights –
CHECKED FOR DAMAGE, SECURITY
AND LEAKS

17. RH Hitch Deck and Fender – CHECKED

FOR DAMAGE AND SECURED

18. (If Equipped) RH Consolidated Service

Center – LEVELS CHECKED.

DECOUPLED OPERATIONS

The procedures are used to operate the chassis
with

the

trailer

removed

(decoupled).

Decoupled operations can only be attempted
when the brake and associated control
systems are reconfigured for decoupled
operations.


Do not operate the chassis (decoupled) from
the trailer unless the brake and associated
control systems are configured properly.
Failure to ensure proper brake system
configuration exists, may result in inoperative
service, parking and secondary brake systems.
Operating the chassis with inoperative brake
systems may result in personal injury or
death.

INSPECTION

1. Vehicle Engine – AS REQUIERED

2. Chocks – INSTALLED

3. Transmission Control Lever –P (Park)

4. Hoist Control Lever – HOLD

5. Gain access to forward hitch area by using

the deck assembly. Identify the LT and
RT junction manifolds.


6. Confirm with maintenance and perform

actual inspection of the chassis systems to
ensure the following brake and control
system configuration exist.


Brake Cooling Manifold (RT Side)


a. A jumper hose connects the brake

cooling port to the brake return port
(-32 fitting).

Brake Activation Manifold (LT Side)


b. Grease port trailer supply port is

capped off (-8 fitting).

c. Brake accumulator trailer supply port

is capped off (-16 fitting).

d. Trailer service return port is capped

off (-16 fitting).

e. Trailer E-Brake/Parking brake retract

supply port is capped off (-10 fitting).

f. Trailer service brake signal in and out

ports (-8 fittings).

Control System

g. Chassis mounted junction box or Y-

harness connection is configured or
jumpered to allow normal tail light
and backup alarm functions.


7. Ensure hitch and deck area are clear of

tools and debris.

8. Vehicle Engine - Start