MBM Corporation 352S - Manual (Page 56)

Operator's Manual multipli 35 Counters
Mathias Bäuerle GmbH 61
All sockets are located at the rear of the operator panel.
The plugs are keyed to prevent incorrect connections.
The connections are as follows:
X11 X10 X12 X9 X8
1
I
I
0
0
2
3
4
Making adjustments on the operator panel is only possible when the main
switch (2) is turned on.
Press the reset key (4) when the red LED (3) is on in the double sheet
detection section of the counter.
The red LED will go out.
Settings are possible only with the red LED out.
1 Line power socket
X8 Solenoid valve
X9 Pulsed photodetector
X10 Double sheet detection
X11 Counter photodetector
X12 Paper travel control