MBM Corporation 352S - Manual (Page 27)

Operator's Manual multipli 35 Air Feeder PBA 35
30 Mathias Bäuerle GmbH
Setting the Format The paper should be positioned in such a way that it is fed approximately
from the center.
• Loosen the knobs (1) by turning them
counter-clockwise.
• Loosen the lock levers (2) by turning
them counter-clockwise.
They can be moved to a convenient
position for tightening by lifting and
then turning them.
• Set the right air guide (4) to half the
paper width with the help of the scale.
• Tighten the knob and the lock lever of the right air bracket.
• Place a paper stack of about 50 sheets on the feed table.
• Slide the left feed guide (3) against the stack.
1
2
3
4
Do not pinch the stack, leave at least 0.5 mm between paper stack
and guide.
• Tighten the star knob and the lock lever of the left air guide.