MBM Corporation 352S - Manual (Page 26)

Operator's Manual multipli 35 Air Feeder PBA 35
Mathias Bäuerle GmbH 29
11. AIR FEEDER PBA 35
Principle of
Operation The air feeder PBA 35 consists of a feeder and a register table.
It is suitable for handling a wide variety of papers - uncoated paper as well as coated,
freshly printed or thin papers.
The sheets are separated by air and vacuum.
Air is supplied from the bottom of the stack both on the left and right side,
separating the paper in the stack which now floats on a cushion of air.
A rotating suction drum can then separate the sheets from the bottom of the paper
stack. This principle has the advantage that paper can be continuously reloaded
with the machine running. There is no need to stop the machine.
Description Components and operating elements of the air feeder PBA 35:
1 Knobs and locking levers for
adjusting the guide brackets
2 Air guide, left
3 Feed table
4 Air guide, right
5 Air-regulating valves
6 Front paper stop
7 Register table
8 Two-speeds adjustment
9 Locking lever for the
suction segment
10 Lever for adjusting the
suction segment
11 Operator panel / Counter
12 Rear paper stop
13 Register rail
14 Ball cage
15 Setting disk for changing
the angle
16 Hold-down bars
17 Photodetector sheet gap
control
18 Photodetector double
sheet detection
13
14
15
16
1
1
3
2
4
5
6
7
8
9
10
11
12
17
18