MBM Corporation iCREASE AIR - Manual (Page 8)

PAPER STOP ASSEMBLIES
INSTALLING THE PAPER STOPS
There are 3 different paper stops. 2 will have bends and 1 will be straight. The straight
paper stop is the rear or back paper stop. The other 2 are the right and left paper stop
and should be positioned as shown below. They hold their position using a magnet
which makes it easy for adjustment. The positions for the paper stops will change for
each individual job. If the paper stops are set to close the paper will hit them as it exits
the machine and will cause a paper jam. If they are set too loose the paper will stack in
an unorganized manner. Getting the position correct is imperative to smooth operation
of the machine.
Now that the Machine is setup, let's learn how to use the machine. The
sections below will guide you through the operation of the machine.
5