MBM Corporation iCREASE AIR - Manual (Page 14)

TRANSPORT AND VACUUM OPERATION
• The Run Button will start the Transport in any given mode. When
pressed it will also turn the air portion of the pressure pump on.
Press it again to stop the transport and turn of the pump. Each Mode
has a timeout feature to preserve the life of the machine.
• The Feed Button is what controls the suction portion of the feeder.
Press it once to turn pulse feed action. This is controlled by a sensor
just before the perf shaft that tells the machine to turn the suction off
until the end of the sheet is reached. The concept of this is that the
machine will only feed one sheet at a time. Providing better
registration when in Crease Mode.
• The Stream Button is designed as a turbo button for when in perf
mode and running faster. This button opens the valve and provides
continuous suction.
• A document may be slowly advanced through the transport by
pushing and holding one of these buttons. These will not turn on the
pump.
EXAMPLE:
The motor should advance transport at slow speed and stop
whenever your finger is lifted.
• Controls on-off function of motor.
EXAMPLE:
Machine will run at mode and speed previously selected.
• Machine will stop.
11