MBM Corporation iCREASE AIR - Manual (Page 24)

LOADING THE FEEDER
Take the paper and load the feed tray. DO NOT OVER LOAD. The weight and size for
the stock you are running will determine how much can be loaded in the feed rails. The
paper should sit snug between the caliper and back stop. Do not pinch the paper as it
will affect the feeding consistency.
FEEDING NOTES
• When set properly, the feed is very efficient and flexible. When neglected it can
become very frustrating to run even the simplest job. The adjustments
previously discussed are very important.
• The icreaseAIR is capable of running 20lb. single sheets, 4-part forms and 100 lb
cover. It is also very capable of handling gloss, coated, and even laminated
stocks. Its flexibility is directly related to the operator’s experience.
• All carbonless sets are fed into the icreaseAIR with as little air pressure as
possible. Use just enough pressure to pull a single multi-part form.
21