3 input, Input – MBM Corporation AEROCUT NANO User Manual

Page 9

AeroCut nano OPERATION MANUAL

2.3 Input

① Enter the cut pattern.

Home screen

② Enter the number of sheets for operation.

All the sheets on the feed table will feed in case 0 is entered in Qty.

Home screen

③ Touch the screen to have

to activate cut-mark registration.

When it is on, the machine register the cut-mark and cross cuts at proper positions

even the image is drifted.

Home screen

Note.

Cut-mark sensor detects the black mark by infrared light.

Some types of toner or ink may reflect the infrared light and cause the sensor not

reading the cut-mark. Please inactivate the cut-mark registration in such cases.