MBM Corporation AEROCUT NANO - Manual (Page 7)

AeroCut nano OPERATION MANUAL
7
1.3 Touch panel
Home screen
PRESET
Page 18
END Page 13
JOB Page 22
MANUSET
Page 19
START
Page 13
Clear
Page 13
STOP
Page 13
Cutmark
Page 9
Manual control
Page 23
Quantity
Page 9
MANUSET screen
SAVE
Page 19
Manual control screen
CUTTER
(Guillotine)
Page 23
TABLE
Page 23
Inching
Page 23
ADJUST
Page 17
SPEED
Page 15
BLOW
Page 16
Double feed
Page 16
PAPER FEED WORK TIME
Page 16
1.4 Paper weight / quality
Use suitable paper stocks which weight is
32 lbs (Bond) – 130 lbs (Cover stock)[120-350g/㎡].
These paper stocks are not suitable in use.
・Papers that has heavily electric static charged. It may cause miss-feed, double feed
or paper jam.
・Papers that are more than 0.125” curled or waved. It may cause miss-feed, double
feed or paper jam.
・Papers that have ink or toner not fused properly. It may cause contaminating the
work and the machine.
・Papers that are too slippery. It may cause miss-feed or inaccurate results.
・Prints that are shrank, stretched or skewed inconsistently. It may cause inaccurate
results.