D-Link DFL-700 - Manual (Page 125)

The new mapping is now in the list.
3. Setup email server and enable alerting, System->Logging:
Check Enable E-mail alerting for IDS/IDP events
Select sensitivity Normal
Enter SMTP server IP (email server): 192.168.2.4
Enter sender: [email protected]
Enter E-mail address 1: [email protected]
Enter E-mail address 2: [email protected]
Click Apply
4. Click Activate and wait for the firewall to restart.
When attacks are stopped by the firewall it will listed in the logs. Since we enabled email
alerting in this example, emails will also be sent to the users webmaster and steve.
In this example we used the prevention mode. This means that the firewall will block all
attacks. In Inspection only mode nothing will be blocked, the firewall will only log the attacks
and send email alerts (if that is enabled).