D-Link DFL-700 - Manual (Page 123)

Intrusion detection and prevention
Intrusion detection and prevention can be enabled for both policies and port mappings. In
this example we are using a port mapping. The policy setup is quite similar.
In this example a mail server with IP 192.168.2.4 and a web server with IP 192.168.2.5 is
connected to the DMZ interface on the firewall.
To set up intrusion detection and prevention to a web server on the DMZ net, follow these
steps:
1. Create a Port mapping for the web server, Firewall->Port Mapping:
Under Configured mappings, click Add new