beautypg.com

Setting amp characteristics – Marantz MCR603 User Manual

Page 40

background image

34

ENGLISH

Connecting the speaker cables

Carefully check the left (L) and right (R) channels and + (red) and –
(black) polarities on the speakers being connected to the unit, and be
sure to connect the channels and polarities correctly.

M-CR603

Adjusting the audio level balance between
speakers A and B

With the output of Speaker A fi xed, the audio level of Speaker B can
be adjusted within the range –6 dB to +6 dB.

1

Press

[MENU]

.

Turns on the Menu settings mode and the Menu appears on the
display. (vpage 26 “Menu map”)

2

Use

ui

to select “Other”-“Speaker Setup”-

“Volume Offset”, then press

[ENTER/MEMO]

,

or

p

.

3

Use

ui

to ajust volume offset, then press

[ENTER/

MEMO]

,

or

p

.

[Adjustable range]

-6 dB, 0 dB, +6 dB

Setting AMP characteristics

• Amp properties can be changed according to the location speakers

are installed.

• Five types of characteristics can be selected.
• Different characteristics can be selected for Speaker A and Speaker B.

1

Press

[MENU]

.

Turns on the Menu settings mode and the Menu appears on the
display. (vpage 26 “Menu map”)

2

Use

ui

to select “Other”-“Speaker Setup”-

“Response”, then press

[ENTER/MEMO]

,

or

p

.

3

Use

ui

to select the characteristics you want to set,

then press

[ENTER/MEMO]

,

or

p

.

[Selectable items]

FLAT

Properties are fl at. (Default)

This enhances bass frequencies when speakers are
placed directly on furniture or on a rack.

If you feel that there is too much bass, select your
favorite properties from among RESPONSE1 to
RESPONSE4.

RESPONSE 1 Cuts low frequencies 60 Hz or under by –12 dB/oct.

RESPONSE 2 Cuts low frequencies 100 Hz or under by –12 dB/oct.

RESPONSE 3 Cuts low frequencies 60 Hz or under by –12 dB/oct.

Also, raises the 400 Hz region by 3 dB.

RESPONSE 4 Cuts low frequencies 100 Hz or under by –12 dB/oct.

Also, raises the 400 Hz region by 3 dB.

Setting the others [Other]

Button located on both the main unit and the remote control

BUTTON

Button only on the main unit

This manual is related to the following products:
See also other documents in the category Marantz Receivers and Amplifiers: