Connecting 6.1-channel speakers using one, Surround back speaker – Marantz SR7007 User Manual
Page 89
86
FL
FR
C
SL
SR
SW
SB
Connecting 6.1-channel speakers using one surround back
speaker
If using only one surround back speaker, connect to the “L” side of the SURROUND BACK terminal.
For speaker settings in this case, see “When 6.1ch speakers are installed” (
To perform 6.1-channel playback using the surround back speaker, set “Assign Mode” to “Main Only” in
steps 3 to 5 for “Set up “Amp Assign”” (
Also use the “Speaker Config.” setting (
) to set “Surr. Back” to “1spkr”.
Cables used for connections
Audio cable (sold separately)
Speaker
cable
Subwoofer
cable
NOTE
• For speaker cable connections, see
.
Speaker connection
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
DVD