Marantz SR7007 - Manual (Page 40)

37
Adjusting the master volume
Use VOLUME df to adjust the
volume.
• The volume display method varies
depending on the “Scale” setting
(
vpage 116 ).
n When the “Scale” setting
( vpage 116 ) is “0 – 98”
GAdjustable rangeH 0.0 0.5 – 98.0
n When the “Scale” setting ( vpage 116 ) is “–79.5dB –
18.0dB”
GAdjustable rangeH – – –.– –79.5dB – 18.0dB
• The variable range differs according to the input signal and channel
level setting.
You can also adjust the master volume by turning VOLUME on the
main unit.
Turning off the sound temporarily
Press MUTE : .
• “MUTE” indicator on the display flashes.
•
: appears on a TV screen.
• The sound is reduced to the level set at “Mute Level” ( vpage 116 ).
• To cancel, press MUTE : again. Muting can also be canceled by
adjusting the master volume.
Important information Playing a Blu-ray Disc player/DVD
player
The following describes the procedure for playing Blu-ray Disc player/
DVD player.
1 Prepare for playback.
q Turn on the power of the TV,
subwoofer and player.
w Change the TV input to the input of
this unit.
e Load the disc in the player.
2
Press ON/STANDBY X to turn on
power to the unit.
3
Press Blu-ray or DVD to switch an input source for a
player used for playback.
4 Play the Blu-ray Disc player or DVD player.
• Make the necessary settings on the player (language setting,
subtitles setting, etc.) beforehand.
Playing Super Audio CD
The following describes the procedure for playing Super Audio CD.
1 Prepare for playback.
q Turn on the power of the subwoofer
and player.
w Load the disc in the player.
2
Press ON/STANDBY X to turn on
power to the unit.
3 Perform the settings of the “Input Assign” menu
( v page 126 ).
Assign HDMI connectors for the input source (example: DVD).
4 Press the input source select button (example: DVD)
to switch an input source assigned in step 3 - q.
5 Set the audio input mode to “Auto” using the “Input
Mode” menu ( v page 128 ).
• The default setting of “Input Mode” is “Auto”.
6 Play the component connected to this unit.
The indicator lights on the display.
When playing back Super Audio CD, DSD signals are converted into
PCM signals which are then converted into analog signals.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion
DVD