beautypg.com

Front speaker”), Procedure – Marantz SR7007 User Manual

Page 137

background image

134

Speakers

Setting items

Setting details

Crossovers
Set the maximum frequency
of the bass signal output
from each channel to
the subwoofer. Set the
Crossover Frequency to
suit the bass reproduction
capability of the speaker
being used.

Crossover : Set the crossover frequency.
40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /

250Hz / Individual : Set the crossover frequency for all speakers. See
the speaker manual for information concerning speaker crossover
frequency.

The following settings can be set when the “Crossover” setting is set to
“Individual”.
Front / Center / Surround / Surr. Back / Front Height : Select speaker

for setting of crossover frequency.

40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /

250Hz : Set the crossover frequency.

• “Crossovers” can be set when the “Bass” – “Subwoofer Mode”

(

vpage 132

) setting is “LFE+Main”, or when you have a speaker that

is set to “Small”.

• Always set the crossover frequency to “80Hz”. When using small

speakers, however, we recommend setting the crossover frequency to
a higher frequency.

• For speakers set to “Small”, sound below the crossover frequency

is cut from the sound output. The cut bass sound is output from the
subwoofer or front speakers.

• The speakers that can be set when “Individual” is selected differ

depending on to the “Subwoofer Mode” setting (

vpage 132

).

• When “LFE” is selected, speakers set to “Small” at “Speaker Config.”

can be set. If the speakers are set to “Large”, “Full Band” is displayed
and the setting cannot be made.

• If set to “LFE+Main”, this setting can be made regardless of the

speaker size.

Front Speaker
Set the front speakers to
use.

NOTE

This can be set when
“Assign Mode” is set to
“Front B” (

vpage 131

).

A : Front speaker A is used.
B : Front speaker B is used.
A+B : Both front speakers A and B are used.

This can also be set by pressing

SPKR A/B

on the main unit.

Each time

SPKR A/B

is pressed, the setting is changed as shown

below.

A

B

A+B

Basic v

ersion

A

dv

anced v

ersion

Inf
or

mation

A

dv

anced v

ersion

DVD

This manual is related to the following products: