Marantz SR6009 - Manual (Page 207)

o Volume Level
Set the volume output level.
Variable
(Default):
Volume can be adjusted.
1 – 98
(–79.5 dB – 18.0 dB):
Volume is fixed at the desired level. The
volume cannot be adjusting using the remote
control unit.
o Volume Limit
Make a setting for maximum volume.
60 (-20 dB) / 70 (-10 dB) / 80 (0 dB)
(Default : 70 (-10 dB))
Off:
Do not set a maximum volume.
This can be set when “Volume Level” is set to “Variable”. (v p. 207)
o Power On Volume
Define the volume setting that is active when the power is turned on.
Last
(Default):
Use the memorized setting from the last
session.
Mute: Always use the muting on condition.
1 – 98
(–79.5 dB – 18.0 dB): The volume is adjusted to the set level.
This can be set when “Volume Level” is set to “Variable”. (v p. 207)
o Mute Level
Set the amount of attenuation when muting is on.
Full
(Default):
The sound is muted entirely.
–40 dB : The sound is attenuated by 40 dB down.
–20 dB : The sound is attenuated by 20 dB down.
This can be set when “Volume Level” is set to “Variable”. (v p. 207)
Contents Connections Playback Settings Tips Appendix
207 Front panel Display Rear panel Remote Index