Marantz SR6009 - Manual (Page 174)

TV Format
Set the video signal format to be output for the TV you are using.
o Format
PAL
(Default):
Select PAL output.
NTSC: Select NTSC output.
“Format” can also be set by the following procedure. However, the menu screen
is not displayed. Following the display content to make the setting.
1. Press and hold the main unit’s ZONE2 SOURCE and STATUS for at least 3
seconds.
“Video Format ” appears on the display.
2. Use the main unit’s TUNER PRESET CH + or TUNER PRESET CH - and set
the video signal format.
3. Press the main unit’s STATUS to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the picture
will not be displayed properly.
Contents Connections Playback Settings Tips Appendix
174 Front panel Display Rear panel Remote Index