Q-See Computer Hardware - Manual (Page 73)

SuperDVR & H.264 Series Cards
User Manual
Error! Use the Home tab to apply
标题 1 to the text that you want to
appear here. Error! Use the Home
tab to apply
标题 1 to the text that
you want to appear here.
73
7.5.1 Basic Configuration
Fig 7.20 Basic setup
1. Caption
There are four options: None, ID, Name and ID/Name to select from.
 ‘None’means no title or name.
 ‘ID’means camera numbers, i.e.1,2,3 and so on.

‘Name’means camera names,i.e.Cam1, Cam2 and so on.
 ‘ID/Name’means both camera number and camera name,i.e.1/Cam1,
2/Cam2 and so on.
2. Live audio
Supports one channel of microphone audio input signal on the PC
motherboard and audio inputs on the card if it has any. Users can choose the
video channel to associate with these audio signals.
In the following area in the basic configuration page, users can input the
computer user name and password in the related boxes. Then when
restarting the computer system, it will access to the system with the user
name and password input in these boxes.
Fig 7.21 Computer System Reboot Setup
As the Windows system may become unstable after a couple of days of
continuous operation. It may cause the SuperDVR system to become
unstable. The software supports auto-reboot. Select and set the
interval by day, which will guide the system to reboot automatically according
to the setups.
3. Alarm setup