Q-See Computer Hardware - Manual (Page 27)

SuperDVR & H.264 Series Cards
User Manual
Error! Use the Home tab to apply
标题 1 to the text that you want to
appear here. Error! Use the Home
tab to apply
标题 1 to the text that
you want to appear here.
27
3.3.7 Schedule Recording
Users can set working schedule for all of the recording modes in ‘Schedule
Configuration’. The dark green light in record status panel shows the
corresponding channel is in Schedule Record mode. Users can change
record mode to manual record at any time, and the dark green light will
change into a light green light .
Please refer to ‘4.4 Schedule Configuration’ for details.
3.3.8 Recycling Recordings
If users enable the Recycling Record function and all the selected HDD
partitions are full, the oldest recorded data will be overwritten by the latest
recorded data.
Users can set recording storage sequence for HDD partitions. The recording
storage will automatically jump to the next partition when the current one is
full. If all the partitions are full and recycling record mode has been enabled,
the new data will overwrite the oldest recorded data automatically. Users can
also set a HDD minimum storage alarm. Then once the present storage
space is less than the minimum storage needed, and recycling record mode
has not been enabled, the recording will automatically stop.