Q-See Computer Hardware - Manual (Page 46)

Error! Use the Home tab to apply
标题 1 to the text that you want to
appear here.
Error! Use the Home
tab to apply
标题 1 to the text that
you want to appear here.
SuperDVR & H.264 Series Cards
User Manual
46
5
P.T.Z Control
Click in the SuperDVR main display interface (refer to Figure3-1) to
access the P.T.Z control area:
Figure5-1 P.T.Z Control Interface
Users can control P.T.Z. devices by the function buttons on the right side,
shown below:
Figure5-2 P.T.Z. Control Function Buttons Panel
In the lower circle, there are five function buttons, i.e. up, down, left, right, and
stop. The other buttons are Focus buttons (+ and -), Zoom buttons (+ and -),
and Iris buttons (+ and -). Click and to increase and decrease the
corresponding values.
When users need to use P.T.Z control, first enter P.T.Z Control Interface (refer
to Figure5-1), and click the corresponding channel (users will see a red fringe
around the channel), then users can begin to control the enabled P.T.Z.