Marantz M-CR611 - Manual (Page 117)

Tips
Simple operations in the power off state
0
When a input source select buttons, 1/3 button, FAVORITES CALL button or 5 button is pressed, the operation is performed at the same time as the
unit switches on. (“Basic operation” (v p. 35), “Playing CDs” (v p. 37), “Favorite function” (v p. 51))
0
When the “Network Control” is set to “On”, you can perform playback, or other operations through AirPlay, “Marantz Hi-Fi Remote”. (v p. 108)
Simple operations for iPod/USB
0
When connected to the Front USB port, the Input Source automatically changes and playback begins. (“Listening to music on an iPod” (v p. 54),
“Playing files stored on USB memory devices” (v p. 58))
I only want to recharge my iPod
0
Connect the iPod to this unit when the unit power is on. Then turn the unit power off, and the iPod will continue to charge until fully charged. (v p. 56)
0
When connected to the Rear USB port, the iPod can be charged without the current Input Source changing.
Specifying the iPod track with the alarm function
0
Connect the iPod to this unit by USB and then press the MODE button to register your favorite tracks in the favorites using “On-Display”
mode. (v p. 51) Then set a track registered in the favorites as the alarm. (v p. 100)
0
When using alarm playback on an iPod touch or iPhone, set the iPod touch or iPhone to “Sleep” mode. If the power is switched off using the power off
operation, alarm playback cannot be used.
Specifying the desired track with the alarm function
0
After registering the desired track in NAS, etc., register the track in the favorites and then specify the track in the alarm settings. (v p. 100)
Change to the DST (Daylight Saving Time)
0
Select “General” - “Clock” in the setup menu and configure the settings. (v p. 101)
Contents Connections Playback Settings Tips Appendix
117 Front/Top
panel
Rear panel
Remote control
unit
Index