Audio out, Language, Auto-standby – Marantz M-CR611 User Manual
Page 104
Audio Out
You can set whether to “Fixed” or “Variable” the analog audio output level.
Fixed
Fixes the analog audio output level.
Variable
(Default):
You can adjust the analog audio output level using
the VOLUME df buttons on the remote control.
The analog audio output volume is linked to the
Speaker A volume.
0 When “Variable” is set, the analog audio output volume is linked to the Speaker A
volume. The analog audio output volume is not adjusted when the Speaker B
volume is adjusted. (v p. 93)
NOTE
0 Note that the analog audio output level changes to the maximum when the analog
audio output setting is changed from “Variable” to “Fixed”.
0 Before changing the settings, turn the volume of the amp connected to the AUDIO
OUT connectors and headphones connected to the unit to the minimum volume.
Language
Set the language for display on the menu.
English / Française / Español (Default :English)
Auto-Standby
When “Auto-Standby” is set to “On”, and no operations are made in the
stopped state for the set amount of time, this unit automatically enters
standby mode.
For the input source “Tuner” and “From iPod” only, when no operation is
performed for eight hours, this unit automatically enters the standby mode.
1min / 5min /
15min / Other:
When “Other” is selected, the “Auto-Standby” time
can be set within the range of 1 - 99 minutes.
Select the value using ui and then press ENTER
to enter the setting value.
Off (Default):
The unit does not go into standby automatically.
104