Dynex DX-R20TV - Manual (Page 9)

Features 9
Universal remote control programming
This TV is compatible with several popular universal remote controls.
3 Direct channel
selection (0-9) Use to directly go to any channel.
4 Previous channel Press to return to the previous channel selected
5 CH + Press to change to a higher numbered channel set into memory.
6 CH - Press to change to a lower numbered channel set into memory.
7 MUTE To turn off the sound, press this button once. The television is
silenced. The muting feature can be turned off by pressing the MUTE
button again or by pressing the VOL + button.
8 ZOOM In digital TV mode, press to zoom in on the picture.
9 MENU Press to display the on-screen menu.
10
ENTER
Menu navigation buttons. Press the arrows to move down, up, left,
or right in the on-screen menus.
Press
to confirm changes or to toggle options on and off in
the on-screen menu.
11 EXIT Press to exit the on-screen menus.
12 PICTURE Press this button to adjust elements of the picture, such as
brightness, contrast, color, tint, and sharpness.
13 SLEEP To set the television to turn off after a preset amount of time, press
the SLEEP button. To confirm the sleep time setting, press the
SLEEP button once and the remaining time is momentarily
displayed. To cancel sleep time, press the SLEEP button repeatedly
until the display turns to 0 minute.
14 – (dash) Press to enter the channel number for digital TV sub-channels (such
as 8-3 or 10-1).
15 VOL + Press to increase the volume level. In some cases, press this button to
select the desired setting during the menu screen operation.
16 VOL - Press to decrease the volume level. In some cases, press this button
to select the desired setting during the menu screen operation.
17 CCD Press this button to turn closed captioning on or off.
18 DISPLAY Press to display channel status and signal information.
19 GUIDE Press to display the program guide.
Brand Program code
Philips 115
DirecTV 10463
Item Button Description