Dynex DX-R20TV - Manual (Page 20)

20 Using your TV
2 Press or to select PRESET, then press or . The PRESET menu opens.
3 Press or to select CH SETUP, then press or . The CHANNEL SETUP submenu
opens.
4 Press or to select a channel number, then press to select SKIP.
5 Press or to set SKIP to ON.
The channel you selected is skipped when you use the CH+/- to browse the channels.
6 To restore a skipped channel, use the number buttons to select the channel, then
repeat steps 1 through 4 and set SKIP to OFF.
Understanding US channel numbering
Most digital TV channels have more than one channel. The main channel carries the signal
for the main TV program. The sub-channels carry signals for additional or alternate
programming, such as a radio or news broadcast.
For example, if the main channel number is 8, the sub-channel number might be 8-1, 8-2, or
8-3.
To select a sub-channel:
1 Press the number buttons for the main channel (for example 8).
2 Press the – button, then press the sub-channel button (for example 1).
AUTO PROGRAM
CH SETUP
PRESET
CH NO
SKIP
CH SETUP
2-2
ON
LABEL WGBH-D X
DIG SIGNAL 25DB