Dynex DX-R20TV - Manual (Page 38)

38 Using your TV
4 Press or to select CLOCK, then press VOL+ to select AM or PM.
5 Use the number buttons to set the current time.
6 Press EXIT to return to the normal screen.
Setting the On Timer and Sleep Timer
This feature allows you to have the television automatically turn on at a predetermined time.
Notes:
- The On Timer only works if the current time has been set.
- The TV must be in Standby mode for the On Timer to work.
- If the TV loses power, the On Timer setting is cleared and must be reset.
To set the On Timer:
1 Press MENU. The MAIN MENU opens.
2 Press
or to select CLOCK, then press or to enter the CLOCK menu. The
CLOCK menu opens.
3 Press or to select ON TIMER, then press VOL+ to select AM or PM.
4 Use the number buttons to set the TV ON time.
5 Press POWER
to switch the TV to Standby mode. The TV will turn on at the preset
time.
To set the Sleep Timer:
• Press the SLEEP button repeatedly until the screen displays the sleep setting you want
(from 0 to 240 minutes).
CLOCK
AU TO CLOCK
ZONE
DST
11:00AM
OFF
OFF
PACIFIC
7:00PM ON TIMER
CLOCK