MacroSystem Audio Effect Package User Manual

Page 5

Audio Effect Package

- 5 -

Noise Sway: Speed
Crackle: Intensity of crackling sounds

Reverb
Creates simple reverberation effects. In contrast with the Hall effect, this effect is based
on a simpler but quicker process. This effect is useful if you only want to give the sound a
slight spatial or echoic feel.

Level: Volume of the reverb effect
Decay: Density of the reverberation
Delay: Length of the reverberation

Robotize
Creates a metallic rasping sound. The Robotize effect uses disharmonic resonances
and can therefore be used to add a metallic characteristic to a sound.

Intensity: Clarity/intensity of the effect
Delay: Tone quality of the metallic sound

Telephony
The sound is modified so that it sounds like you are hearing it over the telephone.
Telephone transmission strongly reduces the quality of the sound of voices, particularly
when older telephones are used. The effect can be used to simulate this kind of loss of
quality.

Preset: Type of telephone

PitchShift
The pitch of the sound is changed. This effect can be used to subtly correct the pitch.
Although strong changes to the pitch unfortunately also diminish the sound quality,
it is nevertheless a lot of fun!

Intensity: How strong an influence the effect will have (100% means maximum, 0%
means no effect)
Pitch: Percentage change in the pitch
Source: Fine-tuning for different signals

Tremolo
A cyclical volume fluctuation. The Tremolo is suitable for such things as helicopter ef-
fects.

Amplification: Intensity of the volume change
Waveform: Type of oscillation to be used
Frequency: How quickly you want the LFO to oscillate