MacroSystem Smart Edit 8 Manual extension - Manual (Page 9)

9 Smart Edit 8 Manual extension
`Original timecode´: The time code (recording time) of each
single scene is shown . The set `Timecode display´ is taken into
consideration .
`Date and time´: This shows the date and time from the Time-
code of the orginal scenes .
`Select font´: This allows you to choose a font type and size .
You can import your own fonts for this purpose and use it for
the display .
`Place timecode´: The chose time format can be positioned .
The size of the display depends on the font you have selected .
More new and improved functions
In addition to the functions described above, there are more
improvements to be found in Smart Edit 8 .
• The Image Pool now stores up to 60 images.
• The Image Pool can now be used to trim a selected scene
when saving – and thus use any single frame as the image .
Due to this, the scene does not have to be trimmed before-
hand .
• The Image Pool has an improved preview display: The
translucent area is now shown as a chequered pattern back-
ground, making it easier to see .
• The menu `Edit´ > `New´ and `Audio´ > `New sample´ now
contain 4 new buttons: These allow you to choose 1s, 3s,
10s and 30s and thus to quickly choose a basic length .
• Power Key (optional product) has been treated to many other
expansions, such as a repeat function to place scenes in the
clip board .