KIP KIPFold 1000 - Manual (Page 2)

2
Safety instructions
For your protection, please read these safety instructions completely before operating the folder
and keep this manual for future reference close to the folder. Carefully observe all warnings, pre-
cautions and instructions on the folder or the ones described in the operating instructions.
In order to guarantee hazard-free operations all maintenance or repair work must only be performed by a
trained
technical person only.
Hazard Levels
DANGER: Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which,
if not avoided, COULD result in death or serious injury.
Warning
CAUTION: Indicates a potentially hazardous situation which,
if not avoided, MAY result in minor or moderate injury.
Maintenance and Modifications
To avoid the risk of introducing hazards, all modifications and maintenance
activities are strictly reserved to properly qualified and trained service techni-
cians.
In daily use, any electrical equipment may be subject to parts wear and
eventual failure. In order to maintain safety and reliability, the Customer En-
gineer (hereafter called CE) must perform regular maintenance inspections.
General
• Make sure that the folder is placed on a level, horizontal surface of
sufficient strength. See the respective KIPFold specifications sheet
for the weight of the equipment.
• Always use materials recommended for the respective folder. Mate-
rials not approved can cause faults in your folder.
• Do not use the folder when it is emitting unusual sounds. Remove
the plug from the power socket or turn off the fixed connection to the
electricity grid and contact Customer Service.
• Do not use the folder in rooms which are subject to excessive vibra-
tion.
• Move the folder careful and slow using two persons.
• Set the adjustable feet on the ground when the folder is in the de-
sired position