TTI TCB-R2000 - Manual (Page 7)

TCB-R2000 English 7
Warning : Never try the operation of your transceiver before connecting a proper
antenna in order not to cause any damage.
1) Place the antenna as high as possible.
) The longer the antenna is, normally the better is the performance of the transceiver.
) Try to mount the antenna in the centre of the surface that you select.
4) Make sure that you have a solid metal-to-metal ground connection.
5) Be careful not to damage the cable during the installation.
It is very important to select a good quality high efficiency 7MHz antenna. A poor
quality antenna or one not designed for the 7MHz band will give very poor perfor-
mance and could cause damage to the transceiver.
Installation
INSTALLING AN ANTENNA
4. Transceiver System Controls and Functions
TRANSCEIVER UNIT
Microphone Jack Front Speaker
Microphone
Jack (Handsfree)
Aux Jack
Remote Control Unit Jack
Remote LCD Unit Jack
Power 1/4 V DC
Remote
LCD Unit Jack
Remote Control Unit Jack
Extra PTT Jack
S-Meter
EXT Jack
Antenna Connector
TCBR2000 man_reized.indd 7 2011.3.14 5:34:19 PM